Workout using SportyPal Pro and LiveView™

To workout using SportyPal Pro and LiveView™:

1. On the LiveView™ micro display: Tap the left or right edge until the Plugins icon is visible.
2. Press the Select key.
3. Make sure the Sporty Pal plugin icon is shown and press the Select key again.
4. On the phone: From the Home screen, find and tap SportyPal Pro.
5. Scroll through the icons at the top of the screen to select the type of workout.
6. Tap Start.
7. If the GPS receiver is disabled, you will see a pop-up. Tap Yes and mark the Use GPS satellites checkbox. Tap Agree and then press the Back key.
8. Wait for the GPS to determine the position.
9. On the LiveView™ micro display: Tap and hold the upper edge to start the workout.
10. Tap the left or right edge to view Elapsed time and distance, Current speed and average speed, altitude and climb, calories and heart rate.
11. Tap and hold the lower edge to pause the workout.
12. Press and hold the Select key to exit the SportyPal plugin.

Note: To monitor the heart rate you need a heart rate add-on device with subscription.