Please help us improve our website

Take our customer survey to evaluate your visit.

It should only take a few minutes to answer five quick questions. Just click the Launch survey button at the end of your visit to begin.

Water and dust resistance

Water and dust resistance – all you need to know

Before you dive into the action with your waterproof or dust-resistant Sony device, you should check its capabilities and limits. Whether you want to take it swimming or on an adventure weekend, there are some basic guidelines to follow to ensure your device can handle whatever life has in store for it.

Let’s start with a closer look at IP ratings and how they may affect what you can and can’t do.

What is an IP rating?

The IP (Ingress Protection) rating is an international standard for measuring a device’s levels of resistance to dust and water. The first digit in the two-digit IP code indicates the level of protection against solid objects, including dust. The second digit indicates how resistant a device is to water. To obtain its IP rating, your smartphone, tablet, or accessory must undergo certified, independent testing.

Resistance to solid objects and dust

IPX0
IP0X. No special protection

1P1XIP1X. Protected against solid objects
> 50 mm in diameter.

1P2XIP2X. Protected against solid objects
> 12.5 mm in diameter.

1P3XIP3X. Protected against solid objects
> 2.5 mm in diameter.

1P4XIP4X. Protected against solid objects
> 1 mm in diameter.

1P5XIP5X. Protected against dust; limited ingress (no harmful deposit).

1P6XIP6X. Dust tight.

Resistance to water

IPX0
IPX0. No special protection

1PX1IPX1. Protected against dripping water.
 

1PX2IPX2. Protected against dripping water when tilted up to 15 degrees from normal position.

1PX3IPX3. Protected against spraying water.
 

1PX4IPX4. Protected against splashing water.
 

1PX5IPX5. Protected against low-pressure water jet spray for at least 3 minutes.

1PX6IPX6. Protected against heavy jet spray for at least 3 minutes.

1PX7IPX7. Protected against the effects of immersion in up to 1 metre of water for 30 minutes.

1PX8IPX8. Protected against the effects of continued immersion in water at depths greater than 1 metre. The exact conditions are specified for each device by the manufacturer.

For more information about IP standards, refer to document number 60529 issued by the International Electrotechnical Commission.
(IEC). For more information about test results for Sony devices, go to http://www.sonymobile.com/testresults

What this means for my device

Water and dust resistance

So you want to capture exciting shots of your friends diving into the pool?

If your Sony device has an IP58 rating, as well as being resistant to dust (but not dust-tight), it is also waterproof to IPX8 standard. That means it’s protected against immersion for up to 30 minutes in fresh (non-saline) water at depths of around 1.5 metres. The exact depth and other details will be specified in your user guide.

Other ways to use your device:

When you’re not swimming, there are other ways to take advantage of your Sony device’s water and dust resistance. You can use it:

  • When your fingers are wet.
  • In some extreme weather conditions, like snow or rain.
  • In dusty environments, such as a windy beach or when hiking along a dusty trail.
Water and dust resistance
Water and dust resistance

But don’t forget the covers…

As well as making sure you familiarise yourself with the IP rating of your device, you must
remember to firmly close all covers before testing its water and dust resistance. This
includes the covers for the micro USB port, the SIM card slot, the memory card slot and
the headphone jack, if applicable.

You should also make sure that no hairs or other small objects get caught between the
covers and the seals when you close them. Not doing so may seriously damage your
device.

Basic care

Here are a few tips to help you make the most of your device:

  • After using your smartphone, tablet or accessory in wet conditions, remember to dry off all covers and other areas where water can gather.
  • After exposure to non-fresh water, such as chlorinated water from a swimming pool, always rinse your device off using fresh water.
  • If either the speaker or microphone get wet, their function may be affected until all the water has completely dried.
  • Drying times will vary depending on the environment, but the process may take up to three hours. During this time, you can still use all the features that do not rely on the speaker or microphone – you can take photos, check your email or send text messages without a worry.
  • Do not use a hairdryer to dry any wet parts.
  • Everyday wear and tear, along with damage to your device, can reduce its ability to resist dust and moisture.
Water and dust resistance

Built for life

Even though your device may be resistant to dust and water, you should avoid unnecessary exposure to environments with excessive dust, sand and mud, or to moist environments with extremely high or low temperatures.

Therefore we wouldn’t recommend using your smartphone, tablet or accessory during a sandstorm or in a hot shower. Never immerse your device in salt water or let the micro USB port, headset jack or other uncovered parts come into contact with salt water. If you’re washing dishes by hand, avoid letting your device come into contact with the detergent or any other liquid chemicals.

We also recommend that you don’t listen to music or other audio underwater, as the presence of water can limit your ability to hear sound.

Take your device swimming

Take your device swimming

If your Sony smartphone or tablet is waterproof to IPX8 standard*, then you can use it in a chlorinated swimming pool. However, avoid keeping the device in the pool for too long and remember to rinse it off thoroughly with fresh water once you get out.

Over time, chlorinated water can corrode the rubber seals, so prolonged use in chlorinated water is not recommended. But if you want to use your device to get underwater close-ups of a spectacular dive or your child’s first swimming lesson, go ahead.

* Sony devices that are rated IPX7 or lower should not be exposed to chlorinated water.

Warranty, repairs and customer service

It’s important to know that your warranty does not cover damage or defects caused by abuse or improper use of your device, including use in environments where the relevant IP rating limitations are exceeded. Also note that compatible accessories, including batteries, chargers, hands-free devices and micro USB cables, are not waterproof and dust-resistant on their own.

If you send a waterproof or dust-resistant device to a Sony Service Centre for repair, our repair teams will test it to ensure your device still meets the requirements of its IP rating.

If you have any questions about the use of your device that are not answered here, please refer to our Customer Support Service for help. For relevant warranty information you can refer to the Important Information document, which is accessible via the Setup guide in your device.

Can I get more specific IP information about my device?

Yes, you can. Just go to http://www.sonymobile.com/testresults and select your device.

Did you find this information helpful?

Thanks, we appreciate your input!

Yes
No